Triax 8 Way TV Aerial Amplifier With 4G LTE Protection 334015
(Incl. VAT @ 20%)
Stock Status: Plenty
Triax Wolsey LTE 4G Protected Eight Way TV Aerial Distribution Amplifier with F Type connectors
LTE 8 Way Distribution Amplifier 334015
This low cost, high quality 8 way TV Aerial amplifier from Triax Wolsey allows you to amplify and distribute your TV Aerial signal to eight different points around your house/premises. This is ideal for when you want to split your TV aerial cable, but your TV Aerial signal isnt powerful enough to be to split. There is a dial on the front of the amplifier so that it can be fine tuned to give the best possible signal - not too much amplification and not too little. F connector fittings provide a secure and reliable connection between the cable and the amplifier. Ideal for placement behind the TV, in the loft or in a cupboard.
This is a dual input amplifier allowing you to combine both your TV aerial and FM/DAB radio aerial into one cable
Part Number: 334015
Number of inputs: 2
Number of outputs: 8
Input frequency band: Both VHF & UHF (Freeview TV & Radio)
Frequency range: 85-230 MHz & 470 - 790 MHz
Out of band rejection: >25dB @821 MHz
Gain (amplification) control: 0-10 dB
Output Level: 93 dB
Forward Gain: 10dB +-2dB
Power on LED
Mains Supply 230Vac 50Hz Supplied with 3 pin UK plug
1,188.8.131.52.12 & 16 way versions available
What does LTE 4G Protection mean?
LTE 4G is the new mobile communication technology currently being rolled out throughout the UK. LTE 4G will operate on frequencies that used to be part of the space used for Analogue TV Aerial transmissions. This new LTE 4G system has the potential to cause interference with your TV aerial system. To eliminate this interference you may need to fit special 4G filters. Likewise new products are coming out onto the market that come manufactured to prevent LTE 4G signals from being a problem. Look out for the LTE, 4G and at800 logo for more information or click HERE..
How do I know if I need a TV Aerial amplifier?
If you find that you are not able to receive all the available channels, chances are it is because you have a poor or weak TV aerial signal. Weak signals are often an effect caused by poor or old cabling or incorrect TV aerial placement. Simply adding a TV Aerial amplifier behind your TV set is enough to compensate for this weak signal.
Can I split my TV Aerial cable?
Most TV Aerials have enough signal to be able to be split at least once. If you live in a good signal area, more than likely you will be able to split your TV Aerial multiple times without any detrimental effect on the quality of signal. If however you live in a poor signal area or possibly have old cables/TV Aerials you may need to boost the signal before you can split it. There are several options for boosting and splitting your TV aerial signal. These include our range of multiple output TV Aerial amplifiers.
If you need any help or advice regarding your TV Aerial please just give us a call on the number at the top of the page. We are always happy to help you out.